- Shipping Company Estimated Delivery Time Shipping Cost
- This item cannot be shipped at your location
Highlights
The ACMER P2 is a remarkable hobby laser that combines the most possible amount of safety features with the highest possible power of a consumer-grade diode laser engraver- 33 Watts. Easy to assemble and operate, the laser cuts through paulownia wood up to 30mm thick and MDF wood 12mm thick with the least possible stains thanks to its ultra-silent Air Assist+ Pump kit. The brand also acts "pre-emptively" to bring 30000mm/min high-speed engraving into reality, catering to the varying needs and preferences of business users.
It’s a great tool for creating ornaments, picture frames, and even more demanding craft projects that necessitate laser cutting. You can cut through a wide variety of materials, such as wood, card stock, leather, acrylic, 0.1mm stainless steel sheets, etc. With the built-in automatic air assist and air pump equipped, the heat around the laser head is minimized with debris from around the contact point being removed and the workpiece being prevented from burning as well.
Powerful 33W Laser Engraver
With its 33W high-power laser output, the ACMER P2 33W laser engraver can cut plywood up to 12mm, stainless steel sheets up to 0.1mm in a single pass, and 18mm black acrylic sheets. Ideal for those who have high demands on the cutting ability of the laser machine.
Ultra High Precision & Speed
ACMER P2 laser engraving machine adopts industrial guide rails instead of wheels, which improves the stability by 20% compared with other machines and ensures 0.01mm high motion precision and 0.001mm repeatable positioning accuracy. P2 33W laser head adopts 0.08mm compressed spot technology to realize detailed and realistic engraving images. Maximum engraving speed up to 30000mm/min.
Air-assist Kit
This air-assist kit will significantly improve the cutting speed and cutting accuracy at the same time, improve the quality of the cut, and avoid yellowing and burning of the material.
Larger Engraving Area and More Engraving Materials
It features 420*400mm large engraving area, and can engrave wood, bamboo, paper, acrylic, leather, PCB board, metal, etc.; cut wood, acrylic, bamboo, leather, paper, etc.
Strong Structure & Super Easy Installation
ACMER P2 laser engraving machine adopts an all-metal structural frame, which is more stable and durable. The whole machine adopts a modular design with 95% pre-assembled delivery, which is super simple and can be installed in 1 minute.
All-around Safety Protection
ACMER P2 is equipped with a safety lock, which needs to be turned on before operation, and an emergency stop button, which can stop the machine at any time in case of an accident. When the laser engraving machine is moved or tilted 15° during processing, it will stop automatically, which makes the operation safer. The engraving machine has a built-in flame sensor, which can detect flame and raise an alarm in time, so you can carry out cutting work with peace of mind.
Wide Compatibility
Widely compatible with professional engraving software such as LaserGRBL (free) and LightBurn (paid), it supports Windows, MacOS (LightBurn), and mobile applications. You can transfer data via Wi-Fi, USB cable, or TF card, allowing offline use.
Specification
| General | Brand: ACMER Model: P2 33W Color: Grey |
| Specification | Laser Power: 33W Engraving Size: 420*400mm Spot Size: 0.08x0.1mm Engraving Speed: 30000mm/min Electrical Requirements: 24V 8A DC Main Board: ESP32 bit Engraving Method: USB/APP/online/TF Software Support System: Mac, Windows, Linux Laser Wavelength: 445±5nm Engraving Material: wood, plastic, paper, leather, bamboo, stainless steel, chevron, acrylic, glass, etc. Engraving Mode: image engraving/text engraving/scanning engraving/convex engraving File Format: SVG, NC, BMP, JPG, PNG, GCODE, etc. Support Software: LaserGRBL, Lightburn Software Support Language: English, German, Italian, French, Chinese Safety Protection: emergency stop switch, anti-tilt device, power safety lock, flame detection |
| Weight & Size | Product Weight: 6.5kg Package Weight: 12.6kg Product Size(L x W x H): 600*650*170mm Package Size(L x W x H): 670*720*180mm |
| Package Contents | 1 x Pre-assembly Machine 1 x Laser Module 1 x Air Pump 1 x Power Adapter 1 x Machine Key 1 x Laser Goggle 1 x Card Reader+TF Card 1 x USB Cable 5 x Test Plank 1 x Metal Card 1 x Acrylic Sheet 1 x Cork Coaster 1 x Wrench 4 x Screwdriver 1 x Brushes 1 x User Manual |
Videos
Customer Photos
Customer Videos
Customer Reviews
| 5 star | 59 | |
| 4 star | 2 | |
| 3 star | 0 | |
| 2 star | 0 | |
| 1 star | 0 |
- All (61)
- Images (1)
- Videos (0)
Questions & Answers
FAQ
Q1. The engraving machine can not cut through the material.
1. Check if the laser module lens has been smoked, if so, wipe it clean with alcohol and a cotton swab.
2. Confirm whether there is the correct focus, you can assist in fixing the focus by focusing the gate. (The focal length can be lowered by
2-3mm when cutting)
3. Ensure that the engraving material is flat and free from concavity and convexity.
4. Properly reduce the carving speed and increase the number of cuts, specific parameters can refer to the table of common carving parameters.
Q2. The engraving machine cannot be connected to the computer side.
1. Check whether the CH340 driver is installed on the computer, if not, please get the driver file from the TF card to install.
2. Check if you have selected the correct port.
3. Check whether the baud rate is "115200".
4. Replace the USB cable and then connect.
5. Replace another computer to try.
6. Replace the motherboard.
Q3. Lightburn zeroing in the wrong direction.
Check that "Laser Origin" and "Job Origin" are in the lower left corner.
Q4. The machine moves to make a strange noise.
1. Check whether the wire connection is normal, you can unplug the socket and reinsert it.
2. Check if there is any abnormal interference to the machine's operation.
Q5. Noise during the operation of the machine.
1. First of all, when the machine is running, there will be some noise from the cooling fan of the laser set itself.
2. Check whether the table is flat.
3. Check whether the machine screws are loose or fall off.
4. Check whether there is a foreign body on the guide rail, you can remove the belt and slide the guide rail by hand to observe whether there is a jamming phenomenon, the conditions can add the right amount of lubricant to the guide rail.
Q6. Y-axis moving abnormally or not moving?
1. Check whether the changeover switch is switched to the "Y" axis position.
2. Check if the Y-axis motor wiring is loose at both ends.
Q7. What is the function of the toggle switch at the back of the engraving machine?
This switch is a rotary module toggle switch, toggle to the left for normal engraving position, and toggle to the right for rotary module position, rotary module can be directly connected to the socket with the "RM" logo next to it.
Q8. Are the focal lengths of engraving and cutting the same?
The focal length of the ACMER P2 engraving machine is 5mm, theoretically, the focal length of the laser module can be reduced when cutting.
Q9. How to ensure the engraved pattern is within the material range?
Before engraving, you can perform a preview step and observe that the preview border range is within the expected area before engraving or cutting.
Q10. How to adjust the belt tightness?
After installing the belt, twist the top wire on the tensioner to adjust the belt tightness, the clockwise twist is to tighten the belt, the counterclockwise twist is to loosen the belt, and both sides of the Y-axis belt tightness needs to be consistent.
Q11. Is it possible to use the engraving machine without protective glasses?
Although the laser module has a protective glass for filtering laser light, a small amount of blue light will spill out due to the user's observation angle, so it is recommended that users wear protective laser glasses during use.
Q12. What are the computer requirements for the engraving machine?
ACMER P2 engraving machine currently supports the mainstream laser engraving software in the market: LaserGRBL and Lightburn; LaserGRBL supports Windows XP, 7, 8, and 10 systems; Lightburn supports Windows, Mac, and Linux systems.
Q13. Can engrave transparent materials?
Blue laser module is not able to engrave transparent materials directly. For transparent glass, you can engrave it after painting black or pasting engraving color paper on the glass surface; for transparent acrylic, we recommend you use a color pen to paint black before engraving.
Q14. Is it normal to generate more smoke during engraving?
The principle of laser engraving is through the burning of the material surface etching traces, so it will produce a certain amount of smoke, especially when cutting MDF board or wood board material smoke more, so we recommend that you place the engraving machine in a ventilated environment for use.
